Quote:
Originally Posted by ChuckG
How about some more info on the plans for those holes.
|
Here's a rough top view, I've decided to wait until I do the plumbing to cut the holes in the stand. All three tank holes are for 1" pipe, with two overflows that should be close to 1200gph max. The center inlet line will split in a tee and come out both sides of the center overflow near the top. The center overflow will be 4x10" for a total of 18" of overflow.
Construction is probably going to take a while, I have to balance my desire to get everything up and running with my cash flow. I'll be doing things as the budget allows for them.